This article relies excessively on references to primary sources. Please improve this article by adding secondary or tertiary sources. Find sources: "List of Farm to Market Roads in Texas" 1000–1099 – news · newspapers · books · scholar · JSTOR (November 2022) (Learn how and when to remove this message)

Texas Farm to Market Road and Ranch to Market Road markers
Highway names
Interstates	Interstate Highway X (IH-X, I-X)
US Highways	U.S. Highway X (US X)
State	State Highway X (SH X)
Loops:	Loop X
Spurs:	Spur X
Recreational:	Recreational Road X (RE X)
Farm or Ranch to Market Roads:	Farm to Market Road X (FM X) Ranch to Market Road X (RM X)
Park Roads:	Park Road X (PR X)
System links
Highways in Texas Interstate US State Toll Loops Spurs FM/RM Park Rec

Farm to Market Roads in Texas are owned and maintained by the Texas Department of Transportation (TxDOT).

Farm to Market Road 1000
Location	Titus County
Length	5.984 mi[1] (9.630 km)
Existed	1948[1]–present

Farm to Market Road 1000 (FM 1000) is located in Titus County.

FM 1000 begins at an intersection with SH 49, heading east on a two-lane undivided road.^[2] The road passes through areas of farms and woods with some homes, winding to the east. The highway makes a turn to the north and runs through more agricultural areas with some patches of woodland and residences. FM 1000 crosses a Union Pacific railroad line and enters the community of Cookville, heading northwest past a few homes and businesses, ending at US 67.^[1][3]

FM 1000 was first designated onto its current alignment on November 23, 1948. On September 27, 2001, the route was proposed to extend west from SH 49 to an intersection with US 271. The proposed extension of FM 1000 was extended further west on February 28, 2008, to reflect a planned relocation of US 271. On March 28, 2013, the section from US 271 to FM 1735 was redesignated as FM 4000 and the section from FM 1735 to SH 49 was removed from the state highway system due to change in the project scope.^[1][4]

Farm to Market Road 1001
Location	Titus County
Length	8.834 mi[5][nb 1] (14.217 km)
Existed	1948[5]–present

Farm to Market Road 1001 (FM 1001) is located in Titus County.

FM 1001 begins at an intersection with US 67/FM 2348 just east of Mount Pleasant. The highway travels in a northeast direction and crosses I-30 before entering Argo. After leaving Argo, FM 1001 turns east and ends at an intersection with FM 1993/County Road 3425.^[3]

FM 1001 was designated on November 23, 1948, running from US 67 to Argo. The highway was extended to its current terminus at FM 1993 on October 29, 1953.

Farm to Market Road 1002
Location	Upshur County
Length	15.823 mi[6] (25.465 km)
Existed	1948[6]–present

Farm to Market Road 1002 (FM 1002) is located in Upshur County.

FM 1002 begins at an intersection with SH 155 north of Big Sandy. The highway intersects with SH 154 in Rhonesboro and ends at an intersection with FM 852 southeast of Winnsboro.

FM 1002 was designated on November 23, 1948, running from SH 155 northeast to Sandy Grove. The highway was extended further north to SH 154 in Rhonesboro on November 20, 1951. FM 1002 was extended 1.8 miles (2.9 km) north of SH 154 on November 25, 1975. The last change came on April 25, 1978, when the highway was extended to FM 852.

Junction list

The entire route is in Upshur County.

Location	mi[7]	km	Destinations	Notes
​	0.0	0.0	SH 155 – Big Sandy, Gilmer
​	5.7	9.2	FM 1795 south – Hawkins	South end of FM 1795 overlap
​	6.3	10.1	FM 1795 north – Latch	North end of FM 1795 overlap
​	9.5	15.3	FM 49 east – Little Mound	South end of FM 49 overlap
​	9.8	15.8	FM 49 west – Pine Mills	North end of FM 49 overlap
Rhonesboro	12.1	19.5	SH 154 – Quitman, Gilmer
​	15.9	25.6	FM 852
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Concurrency terminus

Farm to Market Road 1003
Location	Hardin County
Length	9.554 mi[8][nb 2] (15.376 km)
Existed	1948[8]–present

Farm to Market Road 1003 (FM 1003) is located in Hardin County.

FM 1003 begins at an intersection with FM 770 near the Big Thicket National Preserve. The highway travels in a predominately northern direction before reaching Honey Island, where the road has a short overlap with FM 1293. After leaving Honey Island, FM 1003 runs in a northeast direction before ending at an intersection with US 69/US 287.

FM 1003 was designated on November 23, 1948, running from US 69 to FM 770. The highway's description was changed on September 1, 1972, to show a break at FM 1293 in Honey Island.

Junction list

The entire route is in Hardin County.

Location	mi[9]	km	Destinations	Notes
​	0.0	0.0	FM 770 – Saratoga, Kountze
Honey Island	4.7	7.6	FM 1293 west – Thicket	South end of FM 1293 overlap
	4.9	7.9	FM 1293 east – Kountze	North end of FM 1293 overlap
​	7.9	12.7	FM 943 west – Livingston
​	9.7	15.6	US 69 / US 287 – Wildwood, Kountze
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Concurrency terminus

Farm to Market Road 1004
Location	Jasper and Newton counties
Length	22.123 mi[10][nb 3] (35.604 km)
Existed	1948[10]–present

Farm to Market Road 1004 (FM 1004) is located in Jasper and Newton counties.

FM 1004 begins at an intersection with US 96/SH 62 in Buna. The highway travels through rural areas of Jasper County. FM 1004 turns east at Jasper County Road 626 and has an overlap with US 96 near Call Junction. The highway enters Call just east of the Jasper–Newton county line. FM 1004 runs south of E.O. Siecke State Forest before ending at an intersection with SH 87.

FM 1004 was designated on November 23, 1948, running from US 96 at Call Junction east to SH 87 at Front Creek. The highway was extended westward, southward and southeastward to US 96 in Buna on October 28, 1953. Most of this extension absorbed part of the cancelled FM 1407.^[11]

Junction list

County	Location	mi[12]	km	Destinations	Notes
Jasper	Buna	0.0	0.0	US 96 / SH 62 south to Bus. US 96 – Kirbyville, Evadale
	​	15.5	24.9	US 96 south – Buna	South end of US 96 overlap
	​	15.8	25.4	US 96 north – Kirbyville	North end of US 96 overlap
Newton	Call	18.4	29.6	FM 1013 west – Kirbyville
	​	22.2	35.7	FM 82 west – Kirbyville, E.O. Siecke State Forest
	​	22.4	36.0	SH 87 – Newton, Orange
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Concurrency terminus

Farm to Market Road 1005
Location	Jasper County
Length	10.457 mi[13] (16.829 km)
Existed	1948[13]–present

Farm to Market Road 1005 (FM 1005) is located in Jasper County.

FM 1005 begins at an intersection with FM 1013 northeast of Kirbyville. The highway travels through Magnolia Springs and intersects FM 252 northeast of town before ending at an intersection with US 96.

FM 1005 was designated on November 23, 1948, running from US 96 in Kirbyville southward 2.9 miles (4.7 km) toward Call. The highway was extended to FM 1004 at Call on November 23, 1949. FM 1005 was extended to a road intersection 5 miles (8.0 km) northwest of Kirbyville on May 23, 1951. Later that year on November 20, the highway was extended to US 96 at Zion Hill, absorbing all of the cancelled FM 1006. FM 1006 was reassigned to a road in Orange County. The last change came on December 1, 1958, when the section of FM 1005 from Mount Union to Call was transferred to FM 1013.

Farm to Market Road 1006
Location	Orange County
Length	6.491 mi[14] (10.446 km)
Existed	December 17, 1952[14]–present

Farm to Market Road 1006 (FM 1006) is located in Orange County.

FM 1006 begins at an intersection with SH 87 in southwestern Orange near Orange County Airport. The highway travels around the southern part of the town and turns north onto Bridge Street near the Sabine River (the Louisiana state line). FM 1006 travels north on Bridge Street before ending at an intersection with Bus. US 90.

The current FM 1006 was designated on December 17, 1952, running from SH 87 to US 90, absorbing Spur 171 in the process.^[15]

Junction list

The entire route is in Orange, Orange County.

mi[16]	km	Destinations	Notes
0.0	0.0	SH 87 – Bridge City, Orange
3.6	5.8	FM 2177 north – West Orange
6.5	10.5	Bus. US 90 (Green Avenue) to I-10
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Farm to Market Road 1006
Location	Jasper County
Existed	November 23, 1948–January 16, 1952

A previous route numbered FM 1006 was designated on November 23, 1948, running from US 96 to Magnolia Springs. This highway was cancelled on January 16, 1952, with the mileage being transferred to FM 1005.^[13][14]

Farm to Market Road 1007
Location	Jasper County
Length	6.444 mi[17] (10.371 km)
Existed	1948[17]–present

Farm to Market Road 1007 (FM 1007) is located in Jasper County.

Farm to Market Road 1008
Location	Liberty County
Length	17.25 mi[18] (27.76 km)
Existed	November 23, 1948[18]–present

Farm to Market Road 1008 (FM 1008) is located in Liberty County. It runs from SH 321 in Dayton via Kenefick to SH 321 north of Dayton.

FM 1008 was designated on November 23, 1948, from SH 321 in Dayton to a point 8.2 miles (13.2 km) west. On January 25, 1950, the western terminus was relocated, absorbing a 0.3-mile (0.48 km) section of FM 686. On November 20, 1951, the road was extended northeast 5.1 miles (8.2 km) to Kenefick. On December 17, 1952, the road was extended northeast 0.8 miles (1.3 km) from Kenefick. On October 28, 1953, a 2.4-mile (3.9 km) section from 6 miles (9.7 km) west of Dayton to FM 686 was transferred to FM 686 and the road was extended west 6.6 miles (10.6 km) to a county road at Huffman and 1.1 miles (1.8 km) north from Kenefick. On September 29, 1954, the road was extended another 4.1 miles (6.6 km) north from Kenefick. On August 24, 1955, the road was extended north 5.5 miles (8.9 km) to FM 164. On October 3, 1955, the road was extended to SH 321, 13 miles (21 km) north of Dayton, replacing FM 164. On December 18, 1956, a 12.5-mile (20.1 km) section from Huffman to SH 321 in Dayton was transferred to FM 1960.

Farm to Market Road 1009
Location	Liberty and Jefferson counties
Length	7.701 mi[19] (12.394 km)
Existed	1948[19]–present

Farm to Market Road 1009 (FM 1009) is located in Liberty and Jefferson counties.

Farm to Market Road 1010
Location	Liberty County
Length	9.59 mi[20] (15.43 km)
Existed	1948[20]–present

Farm to Market Road 1010 (FM 1010) is located in Liberty County.

Farm to Market Road 1011
Location	Liberty County
Length	7.134 mi[21] (11.481 km)
Existed	1948[21]–present

Farm to Market Road 1011 (FM 1011) is located in Liberty County.

Farm to Market Road 1012
Location	Newton County
Length	11.022 mi[22] (17.738 km)
Existed	1948[22]–present

Farm to Market Road 1012 (FM 1012) is located in Newton County.

Farm to Market Road 1013
Location	Tyler, Jasper, and Newton counties
Length	34.595 mi[23] (55.675 km)
Existed	1948[23]–present

Farm to Market Road 1013 (FM 1013) is located in Tyler, Jasper and Newton counties.

FM 1013 begins at an intersection with US 69/US 287 in the community of Hillister. The highway travels in a mostly eastern direction and intersects FM 92 in the town of Spurger. East of Spurger, FM 1013 crosses over the Neches River and intersects with FM 1005 before entering the town of Kirbyville. In Kirbyville, the highway intersects FM 252 and briefly turns southeast before turning back east at Main Street. FM 1013 intersects US 96 and turns south onto Elizabeth Avenue and leaves town at FM 82. The highway travels in a mostly southern direction before ending at an intersection with FM 1004 in Call.

FM 1013 was designated on November 23, 1948, running from US 69 at Hillister to FM 92 at Spurger. The highway was extended to FM 1004 at Call on December 5, 1958, absorbing sections of FM 1005 and all of FM 2304.^[24] On April 30, 1962, the break at FM 92 was removed and FM 1013 was slightly rerouted through Spurger.

Junction list

County	Location	mi[25]	km	Destinations	Notes
Tyler	Hillister	0.0	0.0	US 69 / US 287 – Woodville, Kountze
	Spurger	13.3	21.4	FM 92 to US 190 – Silsbee
Jasper	​	22.9	36.9	FM 1005 north – Magnolia Springs
	Kirbyville	30.5	49.1	FM 252 north (Herndon Street)
		31.3	50.4	US 96 (Margaret Avenue) – Jasper, Buna
		32.7	52.6	FM 82
Newton	Call	34.6	55.7	FM 1004 to US 96 / SH 87
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Farm to Market Road 1014
Location	Tyler County
Length	1.183 mi[26] (1.904 km)
Existed	1948[26]–present

Farm to Market Road 1014 (FM 1014) is located in Tyler County.

Farm to Market Road 1015
Location	Hidalgo County
Length	30.106 mi[27] (48.451 km)
Existed	1948[27]–present

Farm to Market Road 1015 (FM 1015) is located in Hidalgo County.

Farm to Market Road 1016
Location	Hidalgo County
Length	8.487 mi[28] (13.659 km)
Existed	1948[28]–present

Farm to Market Road 1016 (FM 1016) is located in Hidalgo County. The highway is known locally as S. Conway Road in Mission and Military Highway in McAllen.

FM 1016 begins at I-2/US 83 in Mission, with Conway Road continuing into the city as SH 107. The highway travels in a southern direction and turns southeast near the Madero neighborhood, with the highway running in close proximity to the Rio Grande. FM 1016 turns east at FM 494 and runs through less developed areas of the city. The highway crosses FM 396 and enters McAllen after the intersection with Shary Road. Between FM 396 and Spur 115, FM 1016 runs through a heavily industrialized area with many business parks. The highway travels through a mainly rural area before ending at an intersection with SH 336.

FM 1016 was designated on November 23, 1948, running from US 83 in Mission to SH 336 south of McAllen as a redesignation of part of SH 107. A small section of the highway in McAllen was transferred to FM 1926 on June 10, 1952.^[29] Part of FM 1016 in Mission was transferred to SH 107 on May 21, 1979.^[30] The highway was relocated on January 26, 1983, between FM 494 and Spur 115. On December 18, 1986, FM 1016 was relocated west of Spur 115. On June 27, 1995, the entire route was redesignated Urban Road 1016 (UR 1016).^[31] The designation reverted to FM 1016 with the elimination of the Urban Road system on November 15, 2018.^[32]

The entire route is in Hidalgo County.

Location	mi[33]	km	Destinations	Notes
Mission	0.0	0.0	I-2 / US 83 (Expressway 83) / SH 107 north (Conway Avenue)	I-2 exit 136
	2.9	4.7	FM 494 south (Military Road) – La Lomita Mission
	3.9	6.3	FM 396 (Anzalduas Highway) – Anzalduas International Bridge
McAllen	7.5	12.1	Spur 115 (S. 23rd Street)
	8.5	13.7	SH 336 (S. 10th Street)
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Farm to Market Road 1017
Location	Jim Hogg, Starr, and Hidalgo counties
Length	76.088 mi[34][nb 4] (122.452 km)
Existed	1948[34]–present

Farm to Market Road 1017 (FM 1017) is located in Jim Hogg, Starr and Hidalgo counties.

FM 1017 begins at an intersection with US 281/SH 186 in San Manuel-Linn. The highway travels in a slight northwest direction through the town and intersects FM 3250 just west of the town. FM 1017 travels through La Reforma before entering San Isidro, intersecting FM 2294. The highway continues to run through rural areas before entering La Gloria, beginning an overlap with FM 755. After leaving FM 755, FM 1017 travels in a westward direction before turning towards the north at FM 2686. The highway travels in a mostly northern direction before ending at an intersection with SH 285 in Hebbronville.

FM 1017 was designated on November 23, 1948, running from US 281 to a point approximately 3 miles (4.8 km) to the west. The highway was extended further west and north to the Jim Hogg County line on November 30, 1949, replacing FM 1431 and FM 1429. running at total a distance of approximately 36.8 miles (59.2 km). FM 1017 was then extended to SH 285 near Hebbronville on November 20, 1951. On June 10, 1952, a section of FM 1017 was transferred to FM 755. There was a proposed extension of the highway to SH 359 on August 29, 1989, but this was cancelled as the court commissioner of Jim Hogg County did not accept the extension.

Junction list

County	Location	mi[35]	km	Destinations	Notes
Hidalgo	San Manuel-Linn	0.0	0.0	Future I-69C / US 281 / SH 186 east – Falfurrias, Edinburg, Raymondville	U.S. 281 is the future Interstate 69C
	​	3.0	4.8	FM 3250 south
	​	16.7	26.9	FM 681 south – McCook, Mission
Starr	San Isidro	24.1	38.8	FM 2294 south – Delmita
	La Gloria	29.5	47.5	FM 755 north – Falfurrias	South end of FM 755 overlap
	​	29.9	48.1	FM 755 south – Rio Grande City	North end of FM 755 overlap
	​	32.5	52.3	FM 2686 west to FM 649
Jim Hogg	Hebbronville	76.6	123.3	SH 285 – Hebbronville, Falfurrias
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Concurrency terminus

Farm to Market Road 1018
Location	Willacy County
Length	12.867 mi[36] (20.707 km)
Existed	1948[36]–present

Farm to Market Road 1018 (FM 1018) is located in Willacy County.

Farm to Market Road 1019
Location	Dimmit County
Length	6.314 mi[37] (10.161 km)
Existed	1948[37]–present

Farm to Market Road 1019 (FM 1019) is located in Dimmit County.

Farm to Market Road 1020
Location	Karnes County
Length	5.021 mi[38] (8.081 km)
Existed	May 23, 1951[38]–present

Farm to Market Road 1020 (FM 1020) is located in Karnes County.

Farm to Market Road 1020
Location	Edwards County
Existed	November 23, 1948–April 18, 1949

A previous route numbered FM 1020 was designated on November 23, 1948, from SH 41 southwest 8.7 miles (14.0 km). FM 1020 was cancelled on April 18, 1949, and became a portion of FM 674 (now RM 674).

Farm to Market Road 1021
Location	Maverick County
Length	31.766 mi[39] (51.122 km)
Existed	1948[39]–present

Farm to Market Road 1021 (FM 1021) is located in Maverick County.

FM 1021 begins at Old Mines Road, an unpaved county road, in a rural area of Maverick County; Old Mines Road continues southeast, becoming Eagle Pass Road in Webb County, which then becomes FM 1472. The highway travels through rural areas with many farms and ranches before entering El Indio, intersecting FM 2644 in the town. FM 1021 continues to travel by rural farms and ranches until crossing the Rosita Creek, with the route becoming more suburban. The highway travels along the city limits of Rosita and Chula Vista, passing near the Kickapoo Traditional Tribe of Texas reservation. FM 1021 cross Loop 480 then runs along the southern border of Las Quintas Fronterizas. The highway enters Eagle Pass near the FM 3443 (Veterans Boulevard) intersection. FM 1021 travels in a northwest-southeast direction along El Indio Highway, passing near several residential and retail areas. The highway turns north onto Monroe Street near the Camino Real International Bridge, then intersects US 57 (Garrison Street), before ending at intersection with Spur 240 (Main Street).

FM 1021 was designated on November 23, 1948, running from SH 85 (which later became US 277) near Eagle Pass to El Indio. The highway's beginning was moved to SH 76 (now US 57) on April 21, 1949. FM 1021 was extended 8.0 miles (12.9 km) south of El Indio on July 15, 1949. The highway was extended another approximately 2.7 miles (4.3 km) on January 27, 1950, and was extended another 3.0 miles (4.8 km) to its current terminus on July 11, 1968.

Junction list

The entire route is in Maverick County.

Location	mi[40]	km	Destinations	Notes
​	0.0	0.0	Old Mines Road	State maintenance begins; roadway continues south as Old Mines Road
El Indio	13.2	21.2	FM 2644 east – Carrizo Springs
Rosita	24.1	38.8	FM 2030 west
Chula Vista	25.7	41.4	FM 2030 east
Eagle Pass	27.7	44.6	Loop 480	Interchange
	29.4	47.3	FM 3443 north (Veterans Boulevard)
	30.4	48.9	FM 375 north (Bibb Street) / Brown Street
	31.7	51.0	US 57 (Garrison Street)
	31.9	51.3	Spur 240 (Main Street)
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Ranch to Market Road 1022
Location	Uvalde County
Length	7.815 mi[41] (12.577 km)
Existed	November 23, 1948[41][nb 5]–present

Ranch to Market Road 1022 (RM 1022) is located in Uvalde County.

RM 1022 begins at a dead end near the former mining community of Dabney. The highway travels in an east direction, with the highway forking northeast of the town, with the other section of RM 1022 traveling to the main entrance of the Vulcan Materials Company. The highway turns north and runs parallel to a rail line until passing in between the White Company Lake and the Uvalde Rock Asphalt Company Lake. RM 1022 runs by several ranches and rock quarries before ending at an intersection with US 90.

RM 1022 was designated on November 23, 1948, as Farm to Market Road 1022 (FM 1022), running from US 90 west of Uvalde to Blewett. The highway was extended to Dabney on November 20, 1951. On October 17, 1959, the road was redesignated as RM 1022.

Farm to Market Road 1023
Location	Uvalde County
Length	11.7 mi[42][nb 6] (18.8 km)
Existed	1948[42]–present

Farm to Market Road 1023 (FM 1023) is located in Uvalde County.

FM 1023 begins at intersection with FM 1049/County Road 301 south of Knippa. The highway is signed as north–south despite running in a southwest–northeast direction for most of its length. FM 1023 enters Uvalde near Garner Field, where it intersects with FM 1574. FM 1023 runs along Garner Field Road and has a short overlap with US 90 before running on 4th Street. The highway runs along 4th Street in eastern Uvalde before ending at an intersection with FM 2369.

FM 1023 was designated on December 20, 1948, running from US 90 east of Uvalde to Garner Field. This section of highway was formerly a part of FM 187.^[43] FM 1023 was extended north from US 90 to FM 2369 on May 22, 1959. this section was rerouted later, with the old route becoming FM 3447 on January 26, 1983. On May 6, 1964, FM 1023 was extended north from Garner Field to US 90.^[44] On October 15, 1965, the section between US 90 and Garner Field was renumbered FM 1574.^[45] The highway was extended to County Road 302 on June 2, 1967. The last change came on July 11, 1968, when FM 1023 was extended to FM 1049.

Junction list

The entire route is in Uvalde County.

Location	mi[46]	km	Destinations	Notes
​	0.0	0.0	FM 1049 north / County Road 301 – Knippa
Uvalde	8.4	13.5	FM 1574 north (Ham Lane)
	10.0	16.1	US 90 east (Main Street)	South end of US 90 overlap
	10.1	16.3	US 90 west (Main Street)	North end of US 90 overlap
	11.8	19.0	FM 2369 (Hacienda Road)
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Concurrency terminus

Ranch to Market Road 1024
Location	Val Verde County
Length	52.272 mi[47] (84.124 km)
Existed	November 23, 1948[47][nb 7]–present

Ranch to Market Road 1024 (RM 1024) is located in Val Verde County. It runs from US 90 near Comstock northward and westward to an intersection with Langtry Road and Pandale Road near Pandale.

RM 1024 was designated on November 23, 1948, as Farm to Market Road 1024 (FM 1024), running from US 90 near Comstock to a point northwestward at a distance of 7.9 miles (12.7 km). On July 15, 1949, FM 1024 was extended northwestward 8.0 miles (12.9 km). On June 21, 1951, FM 1024 was extended northwestward 6.5 miles (10.5 km). On January 23, 1953, FM 1024 was extended northwest 5 miles (8.0 km). On October 29, 1953, FM 1024 was extended northwest 1.0 mile (1.6 km). On October 17, 1959, FM 1024 was redesignated as RM 1024. On September 27, 1960, RM 1024 was extended northwestward 4.8 miles (7.7 km). On May 2, 1962, RM 1024 was extended northwest 4 miles (6.4 km). On May 5, 1966, RM 1024 was extended northwest 7.7 miles (12.4 km). On June 2, 1967, RM 1024 was extended westward 2 miles (3.2 km). On November 5, 1971, RM 1024 was extended westward 5.9 miles (9.5 km) to its current terminus.

Farm to Market Road 1025
Location	Zavala County
Length	19.525 mi[48] (31.422 km)
Existed	1948[48]–present

Farm to Market Road 1025 (FM 1025) is located in Zavala County.

Farm to Market Road 1026
Location	Coleman County
Length	24.912 mi[49] (40.092 km)
Existed	1948[49]–present

Farm to Market Road 1026 (FM 1026) is located in Coleman County.

Farm to Market Road 1027
Location	Eastland County
Length	13.329 mi[50] (21.451 km)
Existed	1948[50]–present

Farm to Market Road 1027 (FM 1027) is located in Eastland County.

Farm to Market Road 1028
Location	McCulloch County
Length	10.56 mi[51] (16.99 km)
Existed	1948[51]–present

Farm to Market Road 1028 (FM 1028) is located in McCulloch County.

Farm to Market Road 1029
Location	Mills County
Length	6.947 mi[52] (11.180 km)
Existed	1948[52]–present

Farm to Market Road 1029 (FM 1029) is located in Mills County.

Farm to Market Road 1030
Location	San Saba County
Length	7.365 mi[53] (11.853 km)
Existed	1948[53]–present

Farm to Market Road 1030 (FM 1030) is located in San Saba County.

Farm to Market Road 1031
Location	San Saba County
Length	9.73 mi[54] (15.66 km)
Existed	1948[54]–present

Farm to Market Road 1031 (FM 1031) is located in San Saba County.

Farm to Market Road 1032
Location	Stephens County
Length	4.285 mi[55] (6.896 km)
Existed	1948[55]–present

Farm to Market Road 1032 (FM 1032) is located in Stephens County. Its eastern terminus is at US 183, 10.5 miles (16.9 km) south of Breckenridge, and its western terminus is at CR 187/190.^[56]

FM 1032 was designated on November 23, 1948, on its current route.

Farm to Market Road 1033
Location	Childress and Cottle counties
Length	16.529 mi[57] (26.601 km)
Existed	1948[57]–present

Farm to Market Road 1033 (FM 1033) is located in Childress and Cottle counties.

Farm to Market Road 1034
Location	Childress County
Length	9.036 mi[58] (14.542 km)
Existed	1948[58]–present

Farm to Market Road 1034 (FM 1034) is located in Childress County.

Farm to Market Road 1035
Location	Collingsworth County
Length	5.087 mi[59] (8.187 km)
Existed	1948[59]–present

Farm to Market Road 1035 (FM 1035) is located in Collingsworth County.

Farm to Market Road 1036
Location	Collingsworth County
Length	7.966 mi[60] (12.820 km)
Existed	1948[60]–present

Farm to Market Road 1036 (FM 1036) is located in Collingsworth County.

Farm to Market Road 1037
Location	Cottle County
Length	10.628 mi[61] (17.104 km)
Existed	1948[61]–present

Farm to Market Road 1037 (FM 1037) is located in Cottle County. The road begins at US 62/US 83 in Paducah, and continues west, then south, ending at County Road 230 in Cottle County north of Delwin.^[61]

FM 1037 was designated on November 23, 1948, from US 70 east of Paducah west 0.7 miles (1.1 km) to end of pavement on Backus Avenue in Paducah. On September 21, 1955, another segment of FM 1037 was designated from US 83 west to US 70 west of Paducah. This created a gap in the route's mileage. On January 22, 1957, FM 1037 was extended from the end of pavement on Backus Avenue to US 83. This closed the gap. On October 31, 1958, FM 1037 was extended south 3.2 miles (5.1 km) from US 70 west of Paducah.^[61]

Farm to Market Road 1038
Location	Cottle County
Length	17.228 mi[62] (27.726 km)
Existed	1948[62]–present

Farm to Market Road 1038 (FM 1038) is located in Cottle County.

Farm to Market Road 1039
Location	Foard County
Length	2.542 mi[63] (4.091 km)
Existed	1948[63]–present

Farm to Market Road 1039 (FM 1039) is located in Foard County.

Farm to Market Road 1040
Location	Live Oak County
Length	1.145 mi[64] (1.843 km)
Existed	May 23, 1951[64]–present

Farm to Market Road 1040 (FM 1040) is located in Live Oak County.

Farm to Market Road 1040
Location	Foard County
Existed	November 23, 1948–April 20, 1949

A previous route numbered FM 1040 was designated on November 23, 1948, from US 70 in Thalia southward 4.0 miles (6.4 km). FM 1040 was cancelled on April 20, 1949, and became a portion of FM 262.

Farm to Market Road 1041
Location	Hall County
Length	17.349 mi[65] (27.921 km)
Existed	1948[65]–present

Farm to Market Road 1041 (FM 1041) is located in Hall County.

Farm to Market Road 1042
Location	Live Oak County
Length	8.687 mi[66] (13.980 km)
Existed	May 23, 1951[66]–present

Farm to Market Road 1042 (FM 1042) is located in Live Oak County.

Farm to Market Road 1042
Location	Hall County
Existed	November 23, 1948–May 26, 1949

A previous route numbered FM 1042 was designated on November 23, 1948, from SH 86 near the Briscoe County line, southward a distance of approximately 2.0 miles (3.2 km). Six months later FM 1042 was cancelled in lieu of extending FM 656.

Farm to Market Road 1043
Location	Knox County
Length	2.431 mi[67] (3.912 km)
Existed	1948[67]–present

Farm to Market Road 1043 (FM 1043) is located in Knox County.

Farm to Market Road 1044
Location	Comal and Guadalupe counties
Length	7.787 mi[68] (12.532 km)
Existed	October 28, 1953[68]–present

Farm to Market Road 1044 (FM 1044) is located in Comal and Guadalupe counties.^[68]

FM 1044's northern terminus is in central New Braunfels, at an intersection with the northbound frontage road of I-35 at exit 185.^[69] Its southern terminus is at FM 78 east of Marion.^[68][70]

The current FM 1044 designation was established on October 28, 1953, connecting US 81 (now I-35) to FM 78.^[68]

Farm to Market Road 1044
Location	Knox County
Existed	November 23, 1948–October 28, 1953

A previous route numbered FM 1044 was designated in Knox County on November 23, 1948, from US 82, 1.5 miles (2.4 km) west of the Baylor County line, southward 3.0 miles (4.8 km). On December 17, 1952, it was extended south 1.9 miles (3.1 km). FM 1044 was cancelled on October 28, 1953, and its mileage was transferred to FM 266.^[68]

Farm to Market Road 1045
Location	Motley County
Length	6.903 mi[71] (11.109 km)
Existed	1948[71]–present

Farm to Market Road 1045 (FM 1045) is located in Motley County.

Farm to Market Road 1046
Location	Wheeler County
Length	20.667 mi[72] (33.260 km)
Existed	1948[72]–present

Farm to Market Road 1046 (FM 1046) is located in Wheeler County.

Farm to Market Road 1047
Location	Hamilton, Mills, and Lampasas counties
Length	21.015 mi[73] (33.820 km)
Existed	November 23, 1948[73]–present

Farm to Market Road 1047 (FM 1047) is located in Hamilton, Mills, and Lampasas counties. It begins at an intersection with FM 581 about 7 miles (11 km) northeast of Lometa.^[74] FM 1047 travels through mostly rural areas and intersects US 84 near Star.^[75] It then crosses the Lampasas River before ending at an intersection with FM 2005 southwest of Hamilton.^[73][76]

FM 1047 was designated on November 23, 1948, running from FM 581 to Lampasas County Road 120. On May 23, 1951, the highway was extended to the Mills County line. FM 1047 was extended to US 84 in Star on November 20, 1951, replacing Spur 183. On May 2, 1962, it was extended to its current terminus at FM 2005, absorbing FM 2707.^[77]

Junction list

County	Location	mi[78]	km	Destinations	Notes
Lampasas	​	0.0	0.0	FM 581 – Lometa, Adamsville
	​	6.3	10.1	FM 572 west – Goldthwaite
Mills	Star	12.9	20.8	US 84 – Goldthwaite, Gatesville
Hamilton	​	21.0	33.8	FM 2005 – Goldthwaite, Hamilton
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Farm to Market Road 1048
Location	Falls County
Length	5.206 mi[79] (8.378 km)
Existed	1948[79]–present

Farm to Market Road 1048 (FM 1048) is located in Falls County.

Farm to Market Road 1049
Location	Uvalde County
Length	13.885 mi[80] (22.346 km)
Existed	1948[80]–present

Farm to Market Road 1049 (FM 1049) is located in Uvalde County.

Ranch to Market Road 1050
Location	Uvalde County
Length	14.71 mi[81] (23.67 km)
Existed	November 23, 1948[81][nb 8]–present

Ranch to Market Road 1050 (RM 1050) is located in Uvalde County.

RM 1050 begins at an intersection with US 83 near Garner State Park. The highway travels in an eastern direction along the park's northern boundary before intersecting RM 2748. RM 1050 travels through the Texas Hill Country before entering Utopia, ending at an intersection with RM 187.

RM 1050 was designated on November 23, 1948, as Farm to Market Road 1050 (FM 1050), running from FM 187 (now RM 187) in Utopia to US 83. On October 17, 1959, FM 1050 was changed to RM 1050.

Farm to Market Road 1051
Location	Uvalde County
Length	11.073 mi[82] (17.820 km)
Existed	November 23, 1948[82]–present

Farm to Market Road 1051 (FM 1051) is located in Uvalde County. Its southern terminus is at an intersection with US 83 southwest of Concan.^[83] It travels northwest approximately 11 miles (18 km) to the community of Reagan Wells before state maintenance ends, with the roadway continuing as CR 424.^[82][84][85]

FM 1051 was designated on November 23, 1948, on its current route.^[82]

Farm to Market Road 1052
Location	Uvalde County
Length	4.453 mi[86] (7.166 km)
Existed	1948[86]–present

Farm to Market Road 1052 (FM 1052) is located in Uvalde County.

Farm to Market Road 1053
Location	Ector, Crane, and Pecos counties
Length	59.378 mi[87] (95.560 km)
Existed	1948[87]–present

Farm to Market Road 1054
Location	Lynn and Borden counties
Length	55.087 mi[88] (88.654 km)
Existed	1948[88]–present

Farm to Market Road 1054 (FM 1054) is located in Lynn and Borden counties.

Farm to Market Road 1055
Location	Deaf Smith, Castro, and Lamb counties
Length	53.871 mi[89] (86.697 km)
Existed	1948[89]–present

Farm to Market Road 1055 (FM 1055) is located in Deaf Smith, Castro and Lamb counties.

Farm to Market Road 1056
Location	Collingsworth County
Length	7.889 mi[90] (12.696 km)
Existed	May 23, 1951[90]–present

Farm to Market Road 1056 (FM 1056) is located in Collingsworth County. It was numbered on July 5, 1951.

Farm to Market Road 1056
Location	Castro County
Existed	December 16, 1948–July 5, 1951

A previous route numbered FM 1056 was designated on December 16, 1948, from SH 86 at Nazareth northward 5.0 miles (8.0 km) to a road intersection. FM 1056 was cancelled on July 5, 1951, and became a portion of FM 168.

Farm to Market Road 1057
Location	Deaf Smith and Castro counties
Length	37.307 mi[91] (60.040 km)
Existed	1948[91]–present

Farm to Market Road 1057 (FM 1057) is located in Deaf Smith and Castro counties.

Farm to Market Road 1058
Location	Deaf Smith County
Length	36.322 mi[92] (58.455 km)
Existed	1948[92]–present

Farm to Market Road 1058 (FM 1058) is located in Deaf Smith County. It runs from US 385 and Loop 211 in Hereford west to the New Mexico state line, where it continues as New Mexico State Road 241.^[92][93][94]

FM 1058 was designated on December 16, 1948, along the current route; what is now US 385 was SH 51 at the time.^[92][95] The route was constructed along a roadway that had been graded c. 1920 to facilitate the movement of crops in the county to the rail line running through Hereford.^[96]

Farm to Market Road 1059
Location	Hutchinson and Carson counties
Length	7.76 mi[97] (12.49 km)
Existed	1948[97]–present

Farm to Market Road 1059 (FM 1059) is located in Hutchinson and Carson counties.

Farm to Market Road 1060
Location	Sherman and Moore counties
Length	20.697 mi[98] (33.309 km)
Existed	1948[98]–present

Farm to Market Road 1060 (FM 1060) is located in Sherman and Moore counties.

Ranch to Market Road 1061
Location	Potter and Oldham counties
Length	33.561 mi[99] (54.011 km)
Existed	December 16, 1948[99][nb 9]–present

Ranch to Market Road 1061 (RM 1061) is located in Potter and Oldham counties.

RM 1061 begins at an intersection with BL I-40 in Amarillo. The highway is known locally as Tascosa Road and runs northwest through the city, passing several subdivisions. RM 1061 leaves the city before having an interchange with Loop 335. The highway travels in a northwestern direction and turns to the west at Melfrank Road. RM 1061 runs along the southern boundary of Bishop Hills and turns back to the northwest near Ranch Road. After passing Ranch View Drive the highway runs through mainly rural areas of the county. RM 1061 intersects with RM 2381 north of Bushland. The highway runs through rural areas before ending at an intersection with US 385 in Tascosa.

RM 1061 was designated as Farm to Market Road 1061 (FM 1061) on December 16, 1948, running from US 66 (currently BL I-40) in Amarillo to a road intersection at a distance of approximately 10.2 miles (16.4 km). On September 21, 1955, the road was extended northwest 16.0 miles (25.7 km) to a point near Ady and was redesignated as RM 1061. RM 1061 was extended to Tascosa at SH 51 on November 21, 1956 (which became US 385 in 1959^[100]). On June 27, 1995, the section between Business I-40 and Loop 335 was redesignated Urban Road 1061 (UR 1061).^[101] The designation reverted to RM 1061 with the elimination of the Urban Road system on November 15, 2018.^[32]

Junction list

County	Location	mi[102]	km	Destinations	Notes
Potter	Amarillo	0.0	0.0	I-40 BL (Amarillo Boulevard)
	​	2.9	4.7	Loop 335	Interchange
	​	10.1	16.3	RM 2381 south – Bushland
Oldham	Tascosa	33.5	53.9	US 385 – Vega, Boys Ranch
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Farm to Market Road 1062
Location	Deaf Smith and Randall counties
Length	23.375 mi[103] (37.618 km)
Existed	1948[103]–present

Farm to Market Road 1062 (FM 1062) is located in Deaf Smith and Randall counties.

Farm to Market Road 1063
Location	Williamson County
Length	5.761 mi[104] (9.271 km)
Existed	July 27, 1964[104]–present

Farm to Market Road 1063 (FM 1063) is located in Williamson County.

Farm to Market Road 1063
Location	Crosby County
Existed	December 16, 1948–November 1, 1960

A previous route numbered FM 1063 was designated on December 16, 1948, from US 62 at Cone, westward and southward to Farmer. On July 14, 1949, the road was extended west 1.0 mile (1.6 km) from Farmer to a road intersection and east 3.0 miles (4.8 km) from US 62 to a road intersection. On September 28, 1949, the road was extended west to FM 378. On December 17, 1952, the road was extended east to FM 651. On November 21, 1956, the road was extended east to FM 28. FM 1063 was cancelled on November 1, 1960, and became a portion of FM 193.

Farm to Market Road 1064
Location	Dawson County
Length	3.834 mi[105] (6.170 km)
Existed	1948[105]–present

Farm to Market Road 1064 (FM 1064) is located in Dawson County.

Farm to Market Road 1065
Location	Briscoe and Floyd counties
Length	13.782 mi[106] (22.180 km)
Existed	1948[106]–present

Farm to Market Road 1065 (FM 1065) is located in Briscoe and Floyd counties.

Farm to Market Road 1066
Location	Gaines and Dawson counties
Length	24.272 mi[107] (39.062 km)
Existed	1948[107]–present

Farm to Market Road 1066 (FM 1066) is located in Gaines and Dawson counties.

Farm to Market Road 1067
Location	Gaines County
Length	4.052 mi[108] (6.521 km)
Existed	1948[108]–present

Farm to Market Road 1067 (FM 1067) is located in Gaines County.

Farm to Market Road 1068
Location	San Patricio County
Length	3.487 mi[109] (5.612 km)
Existed	October 31, 1958[109]–present

Farm to Market Road 1068 (FM 1068) is located in San Patricio County.

Farm to Market Road 1068
Location	Garza County
Existed	December 16, 1948–March 19, 1949

The first route numbered FM 1068 was designated on December 16, 1948, from US 84 westward 2.7 miles (4.3 km) to the Garza–Lynn county line. Three months later FM 1068 was cancelled and became a portion of FM 211.