Link Layer Topology Discovery (LLTD) is a proprietary link layer protocol for network topology discovery and quality of service diagnostics. Microsoft developed it as part of the Windows Rally set of technologies. The LLTD protocol operates over both wired (such as Ethernet (IEEE 802.3) or power line communication[1]) as well as wireless networks (such as IEEE 802.11).
LLTD is included in Windows 7, Windows Vista and Windows 10. It is used by their Network Map feature to display a graphical representation of the local area network (LAN) or wireless LAN (WLAN), to which the computer is connected. Windows XP does not contain the LLTD protocol as a standard component and as a result, Windows XP computers do not appear on the Network Map unless the LLTD responder is installed on Windows XP computers.[2] LLTD is available for download for 32-bit editions of Windows XP with Service Pack 2 (as a publicly released update)[3] and for Windows XP with Service Pack 3 (as a hotfix by request).[4] LLTD Responder was not released for Windows XP Professional x64 Edition. A 2006 fall update for the Xbox 360 enabled support for the LLTD protocol.[5]
Being a link layer (or OSI Layer 2) implementation, LLTD operates strictly on a given local network segment. It cannot discover devices across routers, an operation which would require Internet Protocol level routing.
Link Layer Topology Discovery in Windows Vista consists of two components. The LLTD Mapper I/O component is the master module which controls the discovery process and generates the Network Map. Appropriate permissions for this may be configured with Group Policy settings. It can be allowed or disallowed for domains, and private and public networks. The Mapper sends discovery command packets onto the local network segment via a raw network interface socket. The second component of LLTD are the LLTD Responders which answer Mapper requests about their host and possibly other discovered network information.
In addition to illustrating the layout of a network with representative icons for the hosts and interconnecting lines, each device icon may be explored to produce a popup information box summarizing important network and host parameters, such as MAC address and IP address (both IPv4 and IPv6). Icons are labeled with the hostnames (or first component of their fully qualified domain names), or a representative name of the function of the device, e.g., "gateway". If the device has reported the presence of a management Web interface, clicking on the icon will open a HTTP session to the host.
The LLTD responder for Windows XP only supports reporting of IPv4 addresses and not IPv6.
A royalty free Linux sample implementation of the LLTD responder is available from Microsoft as part of the Windows Rally Development Kit. Using LLTD specifications requires signing a Microsoft Windows Rally license agreement.[6]
There also exists a Perl implementation, using Net::Frame, available via CPAN.[7]
See also
[edit]- Windows Vista networking technologies
- Simple Network Management Protocol
- Service Discovery
- Link Layer Discovery Protocol - same aim (and layer) but IEEE standard protocol.
- Cisco Discovery Protocol - Similar end as LLTD which is based on CDP.
- Nortel Discovery Protocol
References
[edit]- ^ Marcos, Jorge (9 May 2009). "Using Microsoft Windows LLTD with DS2 powerline networks". DS2 Blog. DS2 Corporation (www.ds2.es). Retrieved 18 July 2010.
- ^ "Network Map in Windows Vista does not display computers that are running Windows XP (Revision 7)". Microsoft Support. Microsoft Corporation. 1 July 2010. Retrieved 18 July 2010.
- ^ "Download details: Link Layer Topology Discovery (LLTD) Responder (KB922120)". Microsoft Download Center. Microsoft Corporation. 21 November 2006. Retrieved 18 July 2010.
Supported Operating Systems: Windows XP with Service Pack 2
- ^ "Hotfix Request: 922120". Help and Support. Microsoft Corporation. Retrieved 21 August 2011.
- ^ Windows Networking Development Team. "Xbox 360 Fall Update Includes LLTD". MSDN Blogs. Retrieved May 19, 2015.
- ^ "Link Layer Topology Discovery Protocol Specification". Windows Hardware Developer Central. Microsoft Corporation. 15 September 2006. Retrieved 18 July 2010.
- ^ "Net-Frame-Layer-LLTD Link Layer Topology Discovery layer object". CPAN (metacpan.org). 15 January 2015. Retrieved 30 May 2023.