Developer | Thomas Lundquist |
---|---|
Working state | Inactive |
Source model | Open source |
Initial release | 2000 |
Latest release | 3.0.15 / July 21, 2011 |
Available in | English |
Platforms | x86 |
Kernel type | 2.4.37.9 |
License | various |
Official website | www.zelow.no/floppyfw |
floppyfw was a Linux distribution running BusyBox to provide a firewall/gateway/router on a single bootable floppy disk, but was later available in CD format.[1]
Reviews concluded that it was a very simple and reliable gateway/firewall that could be established on small to medium-sized networks at low cost and with ease.[1] One independent study concluded that it was " best possible security provided by a floppy-based firewall" for the repurposing of old, redundant hardware into Linux-based firewalls or routers.[2]
Requirements
- Intel 80386SX or better
- two network interface cards
- 1.44MB floppy drive
- 12MByte of RAM
Features
Floppyfw's features include:[3]
- Access lists
- IP-masquerading (network address translation)
- Connection tracked packet filtering
- Quite advanced routing
- Traffic shaping
- PPPoE
- Very simple packaging system. Is used for editors, PPP, VPN, traffic shaping and whatever comes up
- Logging through klogd/syslogd, both local and remote
- Serial support for console over serial port
- DHCP server and DNS cache for internal networks
References
- ^ a b "Two floppy-based firewalls". Linux.com. 14 March 2005. Retrieved 14 December 2017.
- "A floppy-based Linux gateway/firewall sure to please". TechRepublic. Retrieved 14 December 2017. - ^ Closson, Sean (2002). "A Review Of Floppy-Based Firewalls And Their Security Considerations". SANS Institute. Retrieved 14 December 2017.
- ^ "FloppyFW, Floppy Based Firewall". www.securiteam.com. 6 October 2002. Retrieved 2017-12-14.