This article needs additional citations for verification. (December 2016) |
C standard library (libc) |
---|
General topics |
Miscellaneous headers |
setjmp.h is a header defined in the C standard library to provide "non-local jumps": control flow that deviates from the usual subroutine call and return sequence. The complementary functions setjmp
and longjmp
provide this functionality.
A typical use of setjmp
/longjmp
is implementation of an exception mechanism that exploits the ability of longjmp
to reestablish program or thread state, even across multiple levels of function calls. A less common use of setjmp
is to create syntax similar to coroutines.
Member functions
int
setjmp(jmp_buf env)
|
Sets up the local jmp_buf buffer and initializes it for the jump. This routine[1] saves the program's calling environment in the environment buffer specified by the env argument for later use by longjmp . If the return is from a direct invocation, setjmp returns 0. If the return is from a call to longjmp , setjmp returns a nonzero value.
|
void
longjmp(jmp_buf env, int value)
|
Restores the context of the environment buffer env that was saved by invocation of the setjmp routine[1] in the same invocation of the program. Invoking longjmp from a nested signal handler is undefined. The value specified by value is passed from longjmp to setjmp . After longjmp is completed, program execution continues as if the corresponding invocation of setjmp had just returned. If the value passed to longjmp is 0, setjmp will behave as if it had returned 1; otherwise, it will behave as if it had returned value .
|
setjmp
saves the current environment (the program state), at some point of program execution, into a platform-specific data structure (jmp_buf
) that can be used at some later point of program execution by longjmp
to restore the program state to that saved by setjmp
into jmp_buf
. This process can be imagined to be a "jump" back to the point of program execution where setjmp
saved the environment. The (apparent) return value from setjmp
indicates whether control reached that point normally (zero) or from a call to longjmp
(nonzero). This leads to a common idiom: if( setjmp(x) ){/* handle longjmp(x) */}
.
POSIX.1 does not specify whether setjmp
and longjmp
save and restore the current set of blocked signals; if a program employs signal handling it should use POSIX's sigsetjmp
/siglongjmp
.
Member types
jmp_buf |
An array type suitable for holding the information needed to restore a calling environment. |
The C99 Rationale describes jmp_buf
as being an array type for backward compatibility; existing code refers to jmp_buf
storage locations by name (without the &
address-of operator), which is only possible for array types.[2] It notes that it can simply be a one-member-long array with its single member being the actual data; indeed, this is the approach employed by the GNU C library, which defines the type as struct __jmp_buf_tag[1]
.
Caveats and limitations
When a "non-local goto" is executed via setjmp
/longjmp
in C++, normal "stack unwinding" does not occur. Therefore, any required cleanup actions will not occur either. This could include closing file descriptors, flushing buffers, or freeing heap-allocated memory.
If the function in which setjmp
was called returns, it is no longer possible to safely use longjmp
with the corresponding jmp_buf
object. This is because the stack frame is invalidated when the function returns. Calling longjmp
restores the stack pointer, which—because the function returned—would point to a non-existent and potentially overwritten or corrupted stack frame.[3][4]
Similarly, C99 does not require that longjmp
preserve the current stack frame. This means that jumping into a function which was exited via a call to longjmp
is undefined.[5]
Example usage
Simple example
The example below shows the basic idea of setjmp. There, main()
calls first()
, which in turn calls second()
. Then, second()
jumps back into main()
, skipping first()
's call of printf()
.
#include <stdio.h>
#include <setjmp.h>
static jmp_buf buf;
void second() {
printf("second\n"); // prints
longjmp(buf, 1); // jumps back to where setjmp was called - making setjmp now return 1
}
void first() {
second();
printf("first\n"); // does not print
}
int main() {
if (!setjmp(buf))
first(); // when executed, setjmp returned 0
else // when longjmp jumps back, setjmp returns 1
printf("main\n"); // prints
return 0;
}
When executed, the above program will output:
second main
Notice that although the first()
subroutine gets called, "first
" is never printed, as second()
never returns control to first()
. Instead, "main
" is printed when the conditional statement if (!setjmp(buf))
is checked a second time.
Exception handling
In this example, setjmp
is used to bracket exception handling, like try
in some other languages. The call to longjmp
is analogous to a throw
statement, allowing an exception to return an error status directly to the setjmp
. The following code adheres to the 1999 ISO C standard and Single UNIX Specification by invoking setjmp
in a limited range of contexts:[6]
- As the condition to an
if
,switch
or iteration statement - As above in conjunction with a single
!
or comparison with an integer constant - As a statement (with the return value unused)
Following these rules can make it easier for the implementation to create the environment buffer, which can be a sensitive operation.[2] More general use of setjmp
can cause undefined behaviour, such as corruption of local variables; conforming compilers and environments are not required to protect or even warn against such usage. However, slightly more sophisticated idioms such as switch ((exception_type = setjmp(env))) { }
are common in literature and practice, and remain relatively portable. A simple conforming methodology is presented below, where an additional variable is maintained along with the state buffer. This variable could be elaborated into a structure incorporating the buffer itself.
In a more modern-looking example, the usual "try" block would be implemented as a setjmp (with some preparation code for multilevel jumps, as seen in first
), the "throw" as longjmp with the optional parameter as the exception, and the "catch" as the "else" block under "try".
#include <setjmp.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
static void first();
static void second();
/* Use a file scoped static variable for the exception stack so we can access
* it anywhere within this translation unit. */
static jmp_buf exception_env;
static int exception_type;
int main(void) {
char* volatile mem_buffer = NULL;
if (setjmp(exception_env)) {
// if we get here there was an exception
printf("first failed, exception type: %d\n", exception_type);
} else {
// Run code that may signal failure via longjmp.
puts("calling first");
first();
mem_buffer = malloc(300); // allocate a resource
printf("%s\n", strcpy(mem_buffer, "first succeeded")); // not reached
}
free(mem_buffer); // NULL can be passed to free, no operation is performed
return 0;
}
static void first() {
jmp_buf my_env;
puts("entering first"); // reached
memcpy(my_env, exception_env, sizeof my_env); // store value of exception_env in my_env since exception_env will be reused
switch (setjmp(exception_env)) {
case 3: // if we get here there was an exception.
puts("second failed, exception type: 3; remapping to type 1");
exception_type = 1;
default: // fall through
memcpy(exception_env, my_env, sizeof exception_env); // restore exception stack
longjmp(exception_env, exception_type); // continue handling the exception
case 0: // normal, desired operation
puts("calling second"); // reached
second();
puts("second succeeded"); // not reached
}
memcpy(exception_env, my_env, sizeof exception_env); // restore exception stack
puts("leaving first"); // never reached
}
static void second() {
puts("entering second" ); // reached
exception_type = 3;
longjmp(exception_env, exception_type); // declare that the program has failed
puts("leaving second"); // not reached
}
This program's output is:
calling first entering first calling second entering second second failed, exception type: 3; remapping to type 1 first failed, exception type: 1
Cooperative multitasking
C99 provides that longjmp
is guaranteed to work only when the destination is a calling function, i.e., that the destination scope is guaranteed to be intact. Jumping to a function that has already terminated by return
or longjmp
is undefined.[5] However, most implementations of longjmp
do not specifically destroy local variables when performing the jump. Since the context survives until its local variables are erased, it could actually be restored by setjmp
. In many environments (such as Really Simple Threads and TinyTimbers), idioms such as if(!setjmp(child_env)) longjmp(caller_env);
can allow a called function to effectively pause-and-resume at a setjmp
.
This is exploited by thread libraries to provide cooperative multitasking facilities without using setcontext
or other fiber facilities.
Considering that setjmp
to a child function will generally work unless sabotaged, and setcontext
, as part of POSIX, is not required to be provided by C implementations, this mechanism may be portable where the setcontext
alternative fails.
Since no exception will be generated upon overflow of one of the multiple stacks in such a mechanism, it is essential to overestimate the space required for each context, including the one containing main()
and including space for any signal handlers that might interrupt regular execution. Exceeding the allocated space will corrupt the other contexts, usually with the outermost functions first. Unfortunately, systems requiring this kind of programming strategy are often also small ones with limited resources.
#include <setjmp.h>
#include <stdio.h>
jmp_buf mainTask, childTask;
void call_with_cushion();
void child();
int main() {
if (!setjmp(mainTask)) {
call_with_cushion(); // child never returns, yield
} // execution resumes after this "}" after first time that child yields
while (1) {
printf("Parent\n");
if (!setjmp(mainTask))
longjmp(childTask, 1); // yield - note that this is undefined under C99
}
}
void call_with_cushion() {
char space[1000]; // Reserve enough space for main to run
space[999] = 1; // Do not optimize array out of existence
child();
}
void child() {
while (1) {
printf("Child loop begin\n");
if (!setjmp(childTask))
longjmp(mainTask, 1); // yield - invalidates childTask in C99
printf("Child loop end\n");
if (!setjmp(childTask))
longjmp(mainTask, 1); // yield - invalidates childTask in C99
}
/* Don't return. Instead we should set a flag to indicate that main()
should stop yielding to us and then longjmp(mainTask, 1) */
}
References
- ^ a b ISO C states that
setjmp
must be implemented as a macro, but POSIX explicitly states that it is undefined whethersetjmp
is a macro or a function. - ^ a b C99 Rationale, version 5.10, April 2003, section 7.13
- ^ CS360 Lecture Notes — Setjmp and Longjmp
- ^ setjmp(3) Archived 2009-07-26 at the Wayback Machine
- ^ a b ISO/IEC 9899:1999, 2005, 7.13.2.1:2 and footnote 211
- ^ The Single UNIX Specification, Version 4 from The Open Group : set jump point for a non-local goto – System Interfaces Reference,
Further reading
- Nidito, Francesco (July 2, 2016). "Exceptions in C with Longjmp and Setjmp". Groups.Di.Unipi.it. Retrieved 2024-01-02.
External links
- The Single UNIX Specification, Version 4 from The Open Group : set jump point for a non-local goto – System Interfaces Reference,
- is there sigsetjmp/siglongjmp (again) (about this functions in mingw/MSYS)