Aluminium chloride

Aluminium trichloride hexahydrate, pure (top), and contaminated with iron(III) chloride (bottom)
Names
IUPAC name Aluminium chloride
Other names Aluminium(III) chloride Aluminium trichloride Trichloroaluminum
Identifiers
CAS Number	7446-70-0 (anhydrous) Y 10124-27-3 (hydrate) N 7784-13-6 (hexahydrate) Y
3D model (JSmol)	monomer: Interactive image dimer: Interactive image hexahydrate: Interactive image
ChEBI	CHEBI:30114 Y
ChemSpider	22445 Y
ECHA InfoCard	100.028.371
EC Number	231-208-1
Gmelin Reference	1876
PubChem CID	24012
RTECS number	BD0530000
UNII	LIF1N9568Y Y 3CYT62D3GA (hexahydrate) Y
CompTox Dashboard (EPA)	DTXSID6029674
InChI InChI=1S/Al.3ClH/h;3*1H/q+3;;;/p-3 Y Key: VSCWAEJMTAWNJL-UHFFFAOYSA-K Y InChI=1/Al.3ClH/h;3*1H/q+3;;;/p-3 Key: VSCWAEJMTAWNJL-DFZHHIFOAR
SMILES monomer: Cl[Al](Cl)Cl dimer: Cl[Al-]1(Cl)[Cl+][Al-]([Cl+]1)(Cl)Cl hexahydrate: [OH2+][Al-3]([OH2+])([OH2+])([OH2+])([OH2+])[OH2+].[Cl-].[Cl-].[Cl-]
Properties
Chemical formula	AlCl3
Molar mass	133.341 g/mol (anhydrous) 241.432 g/mol (hexahydrate) [1]
Appearance	Colourless crystals, hygroscopic
Density	2.48 g/cm3 (anhydrous) 2.398 g/cm3 (hexahydrate) [1]
Melting point	180 °C (356 °F; 453 K) (anhydrous, sublimes)[1] 100 °C (212 °F; 373 K) (hexahydrate, decomposes)[1]
Solubility in water	439 g/L (0 °C) 449 g/L (10 °C) 458 g/L (20 °C) 466 g/L (30 °C) 473 g/L (40 °C) 481 g/L (60 °C) 486 g/L (80 °C) 490 g/L (100 °C)
Solubility	Soluble in hydrogen chloride, ethanol, chloroform, carbon tetrachloride Slightly soluble in benzene
Vapor pressure	133.3 Pa (99 °C) 13.3 kPa (151 °C) [2]
Viscosity	0.35 cP (197 °C) 0.26 cP (237 °C) [2]
Structure
Crystal structure	Monoclinic, mS16
Space group	C12/m1, No. 12[3]
Lattice constant	a = 0.591 nm, b = 0.591 nm, c = 1.752 nm[3]
Lattice volume (V)	0.52996 nm3
Formula units (Z)	6
Coordination geometry	Octahedral (solid) Tetrahedral (liquid)
Molecular shape	Trigonal planar (monomeric vapour)
Thermochemistry
Heat capacity (C)	91.1 J/(mol·K)[4]
Std molar entropy (S⦵298)	109.3 J/(mol·K)[4]
Std enthalpy of formation (ΔfH⦵298)	−704.2 kJ/mol[4]
Gibbs free energy (ΔfG⦵)	−628.8 kJ/mol[4]
Pharmacology
ATC code	D10AX01 (WHO)
Hazards
GHS labelling:[6]
Pictograms
Signal word	Danger
Hazard statements	H314
Precautionary statements	P260, P280, P301+P330+P331, P303+P361+P353, P305+P351+P338+P310, P310
NFPA 704 (fire diamond)	3 0 2
Lethal dose or concentration (LD, LC):
LD50 (median dose)	380 mg/kg, rat (oral, anhydrous) 3311 mg/kg, rat (oral, hexahydrate)
NIOSH (US health exposure limits):
PEL (Permissible)	None[5]
REL (Recommended)	2 mg/m3[5]
IDLH (Immediate danger)	N.D.[5]
Related compounds
Other anions	Aluminium fluoride Aluminium bromide Aluminium iodide
Other cations	Boron trichloride Gallium trichloride Indium(III) chloride Magnesium chloride
Related Lewis acids	Iron(III) chloride Boron trifluoride
Supplementary data page
Aluminium chloride (data page)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is YN ?) Infobox references

Aluminium chloride

Clinical data
AHFS/Drugs.com	Monograph
License data	US DailyMed: aluminum chloride
Routes of administration	Topical
ATC code	None
Identifiers
CompTox Dashboard (EPA)	DTXSID6029674
ECHA InfoCard	100.028.371
Data page
Aluminium chloride (data page)

Aluminium chloride, also known as aluminium trichloride, is an inorganic compound with the formula AlCl₃. It forms a hexahydrate with the formula [Al(H₂O)₆]Cl₃, containing six water molecules of hydration. Both the anhydrous form and the hexahydrate are colourless crystals, but samples are often contaminated with iron(III) chloride, giving them a yellow colour.

The anhydrous form is commercially important. It has a low melting and boiling point. It is mainly produced and consumed in the production of aluminium, but large amounts are also used in other areas of the chemical industry.^[7] The compound is often cited as a Lewis acid. It is an example of an inorganic compound that reversibly changes from a polymer to a monomer at mild temperature.

AlCl₃ adopts three structures, depending on the temperature and the state (solid, liquid, gas). Solid AlCl₃ has a sheet-like layered structure with cubic close-packed chloride ions. In this framework, the Al centres exhibit octahedral coordination geometry.^[8] Yttrium(III) chloride adopts the same structure, as do a range of other compounds. When aluminium trichloride is in its melted state, it exists as the dimer Al₂Cl₆, with tetracoordinate aluminium. This change in structure is related to the lower density of the liquid phase (1.78 g/cm³) versus solid aluminium trichloride (2.48 g/cm³). Al₂Cl₆ dimers are also found in the vapour phase. At higher temperatures, the Al₂Cl₆ dimers dissociate into trigonal planar AlCl₃ monomer, which is structurally analogous to BF₃. The melt conducts electricity poorly,^[9] unlike more ionic halides such as sodium chloride.

Aluminium chloride monomer belongs to the point group D_3h in its monomeric form and D_2h in its dimeric form.

The hexahydrate consists of octahedral [Al(H₂O)₆]³⁺ cation centers and chloride anions (Cl⁻) as counterions. Hydrogen bonds link the cation and anions.^[10] The hydrated form of aluminium chloride has an octahedral molecular geometry, with the central aluminium ion surrounded by six water ligand molecules. Being coordinatively saturated, the hydrate is of little value as a catalyst in Friedel-Crafts alkylation and related reactions.

AlCl₃ is a common Lewis-acid catalyst for Friedel-Crafts reactions, both acylations and alkylations.^[11] Important products are detergents and ethylbenzene. These types of reactions are the major use for aluminium chloride, for example, in the preparation of anthraquinone (used in the dyestuffs industry) from benzene and phosgene.^[9] In the general Friedel-Crafts reaction, an acyl chloride or alkyl halide reacts with an aromatic system as shown:^[11]

The alkylation reaction is more widely used than the acylation reaction, although its practice is more technically demanding. For both reactions, the aluminium chloride, as well as other materials and the equipment, should be dry, although a trace of moisture is necessary for the reaction to proceed.^[12] Detailed procedures are available for alkylation^[13] and acylation^[14][15] of arenes.

A general problem with the Friedel-Crafts reaction is that the aluminium chloride catalyst sometimes is required in full stoichiometric quantities, because it complexes strongly with the products. This complication sometimes generates a large amount of corrosive waste. For these and similar reasons, the use of aluminium chloride has often been displaced by zeolites.^[7]

Aluminium chloride can also be used to introduce aldehyde groups onto aromatic rings, for example via the Gattermann-Koch reaction which uses carbon monoxide, hydrogen chloride and a copper(I) chloride co-catalyst.^[16]

Aluminium chloride finds a wide variety of other applications in organic chemistry.^[17] For example, it can catalyse the ene reaction, such as the addition of 3-buten-2-one (methyl vinyl ketone) to carvone:^[18]

It is used to induce a variety of hydrocarbon couplings and rearrangements.^[19][20]

Aluminium chloride combined with aluminium in the presence of an arene can be used to synthesize bis(arene) metal complexes, e.g. bis(benzene)chromium, from certain metal halides via the Fischer–Hafner synthesis. Dichlorophenylphosphine is prepared by reaction of benzene and phosphorus trichloride catalyzed by aluminium chloride.^[21]

Topical aluminum chloride hexahydrate is used for the treatment of hyperhidrosis (excessive sweating).^[22][23][24]

Anhydrous aluminium chloride is a powerful Lewis acid, capable of forming Lewis acid-base adducts with even weak Lewis bases such as benzophenone and mesitylene.^[11] It forms tetrachloroaluminate ([AlCl₄]⁻) in the presence of chloride ions.

Aluminium chloride reacts with calcium and magnesium hydrides in tetrahydrofuran forming tetrahydroaluminates.^{[citation needed]}

Anhydrous aluminium chloride is hygroscopic, having a very pronounced affinity for water. It fumes in moist air and hisses when mixed with liquid water as the Cl⁻ ligands are displaced with H₂O molecules to form the hexahydrate [Al(H₂O)₆]Cl₃. The anhydrous phase cannot be regained on heating the hexahydrate. Instead HCl is lost leaving aluminium hydroxide or alumina (aluminium oxide):

[Al(H₂O)₆]Cl₃ → Al(OH)₃ + 3 HCl + 3 H₂O

Like metal aquo complexes, aqueous AlCl₃ is acidic owing to the ionization of the aquo ligands:

[Al(H₂O)₆]³⁺ ⇌ [Al(OH)(H₂O)₅]²⁺ + H⁺

Aqueous solutions behave similarly to other aluminium salts containing hydrated Al³⁺ ions, giving a gelatinous precipitate of aluminium hydroxide upon reaction with dilute sodium hydroxide:

AlCl₃ + 3 NaOH → Al(OH)₃ + 3 NaCl

Aluminium chloride is manufactured on a large scale by the exothermic reaction of aluminium metal with chlorine or hydrogen chloride at temperatures between 650 and 750 °C (1,202 and 1,382 °F).^[9]

2 Al + 3 Cl₂ → 2 AlCl₃

2 Al + 6 HCl → 2 AlCl₃ + 3 H₂

Aluminium chloride may be formed via a single displacement reaction between copper(II) chloride and aluminium.

2 Al + 3 CuCl₂ → 2 AlCl₃ + 3 Cu

In the US in 1993, approximately 21,000 tons were produced, not counting the amounts consumed in the production of aluminium.^[7]

Hydrated aluminium trichloride is prepared by dissolving aluminium oxides in hydrochloric acid. Metallic aluminium also readily dissolves in hydrochloric acid ─ releasing hydrogen gas and generating considerable heat. Heating this solid does not produce anhydrous aluminium trichloride, the hexahydrate decomposes to aluminium hydroxide when heated:

[Al(H₂O)₆]Cl₃ → Al(OH)₃ + 3 HCl + 3 H₂O

Aluminium also forms a lower chloride, aluminium(I) chloride (AlCl), but this is very unstable and only known in the vapour phase.^[9]

Anhydrous aluminium chloride is not found as a mineral. The hexahydrate, however, is known as the rare mineral chloraluminite.^[25] A more complex, basic and hydrated aluminium chloride mineral is cadwaladerite.^[26][25]

Anhydrous AlCl₃ reacts vigorously with bases, so suitable precautions are required. It can cause irritation to the eyes, skin, and the respiratory system if inhaled or on contact.^[27]

• Aluminium monochloride

Wikimedia Commons has media related to Aluminium chloride.

• International Chemical Safety Card 1125
• Index of Organic Synthesis procedures that utilize AlCl₃
• The period 3 chlorides
• MSDS Archived 2011-07-22 at the Wayback Machine
• Government of Canada Fact Sheets and Frequently Asked Questions: Aluminum Salts